Publications

Report for Thermcyc

Experimental planning and verification of working fluids; Babi, Dennesh Kavi, 2016
Industrial Energy Mapping; B. Huang, F. Müller Holm, F. Buhler, 2017

Workshop High Temperature Heat Pump

A book of presentations from the conference has been uploaded to Orbit.
Find a collection of the presentations here.

Articles (peer reviewed)

Andrea Meroni, Benjamin Zühlsdorf, Brian Elmegaard, and Fredrik Haglind. Design of centrifugal compressors for heat pump systems. Applied Energy, Vol, 232, 139-156, 2018.
Andrea Meroni, Jesper Graa Andreasen, Giacomo Persico, and Fredrik Haglind. Optimization of organic Rankine cycle power systems considering multistage axial turbine design. Applied Energy, Vol. 209, p. 339-354, 2018.
Andrea Meroni, Miles Robertson, Ricardo Martinez-Botas, and Fredrik Haglind, A methodology for the preliminary design and performance prediction of high-pressure ratio radial-inflow turbines. Energy, Vol. 164, 1062-1078, 2018
Andreasen, J.G., Kærn, M., Pierobon, L., Larsen, U., Haglind, F.: Multi-objective optimization of pure and mixed working fluids for organic Rankine cycles, Journal Energies, 2016
Andreasen, J.G., Larsen, U., Knudsen, T., Haglind, F.: Design and optimization of a novel organic Rankine cycle with improved boiling process, Journal publication, 2015
Bühler, F., Zühlsdorf, B., Nguyen, T.-V., Elmegaard, B., 2019, ‘A comparative assessment of electrification strategies for industrial sites: Case of milk powder production’, Applied Energy, vol 250, pp. 1383-1401. DOI: 10.1016/j.apenergy.2019.05.071
Cignitti, S., Andreasen, J. G., Haglind, F., Woodley, J.M., Abildskov, J.: Integrated working fluid-thermodynamic cycle design of organic Rankine cycle power systems for waste heat recovery., Journal: Applied Energy, 2017
Cignitti, S., Andreasen, J.G., Mansouri, S.S., Haglind, F., Woodley, J.M. and Abildskov J. (2017). Integrated working fluid-cycle design of an industrial organic Rankine cycle unit for waste heat recovery. Appl. Energy, 203, 442-453.
Cignitti, S., Mansouri, S.S., Woodley, J.M. and Abildskov, J. (2018). Systematic optimization-based integrated chemical product-process design framework. Ind. Eng. Chem. Res., 57, 677-688.
Enrico Baldasso, Jesper Graa Andreasen, Maria Engracia Mondejar, Ulrik Larsen, and Fredrik Haglind. Technical and economic feasibility of organic Rankine cycle-based waste heat recovery systems on feeder ships: Impact of nitrogen oxides emission abatement technologies. Energy Conversion and Management, Vol. 183, 577-589, 2019
Frutiger, J., Andreasen, J. G., Liu, W., Spliethoff, H.; Haglind, F.; Abildskov, J.; Sin, G.: Working fluid selection for organic Rankine cycles - Impact of uncertainty of fluid properties, Journal: Energy, 2016
Frutiger, J., Bell, I., O'Connell, J.P., Kroenlein, K., Abildskov, J. and Sin, G. (2017). Uncertainty assessment of equations of state with application to an organic rankine cycle. Molecular Phys., 115, 1225-1244
Frutiger, J., Cignitti, S., Abildskov, J., Woodley, J.M. and Sin, G. (2019). Computer-aided molecular product-process design under property uncertainties – A Monte Carlo based optimization strategy. Computers Chem. Engng., 122, 247-257.
Frutiger, J., Marcarie, C., Abildskov, J, Sin, G.: Group-Contribution based Property Estimation and Uncertainty analysis for Flammability-related Properties, Journal: Journal of Hazardous Materials, 2016
Frutiger, J., Marcarie, C., Abildskov, J. and Sin, G. (2016). A comprehensive methodology for development, parameter estimation, and uncertainty analysis of group contribution based property models-an application to the heat of combustion. J. Chem. Eng. Data., 61, 602-613.
Frutiger, J., Marcarie, C., Abliskov J., Sin, G.: A comprehensive methodology for development, parameter estimation and an uncertainty analysis of group contribution based property models, Article, 2015
Frutiger, J., Zühlsdorf, B., Elmegaard, B., Abildskov, J. and Sin, G. (2018). Reverse engineering of working fluid selection for industrial heat pump based on monte carlo sampling and uncertainty analysis. Ind. Eng. Chem. Res., 57, 13463-13477.
Frutiger, J.; Bell, I.; Connell J. P. ; Kroenlein, K.; Abildskov, J.; Sin, G.: Uncertainty Assessment of Equations of State with Application to an Organic Rankine Cycle Journal: Molecular Physics, 2017
Hærvig, J., K. Sørensen, T. Condra.: Guidelines for Optimal Selection of Working Fluid for an Organic Rankine Cycle in Relation to Waste Heat Recovery, Journal: Energy, 2016
Hærvig, J., K. Sørensen, T. Condra.: On the Fully-Developed Heat Transfer Enhancing Flow Field in Sinusoidally, Spirally Corrugated Tubes Using Computational Fluid Dynamics, Journal: International Journal of Heat and Mass Transfer, 2017
Hærvig, J., Kleinhans, U., Wieland, C., Spliethoff, H., Jensen, A. L., Condra, T. J., Sørensen, K.: On the Adhesive JKR Contact and Rolling Models for Reduced Particle Stiffness Discrete Element Simulations 2017
Hærvig, J., Sørensen, K., & Condra, T. J. (2016). Guidelines for optimal selection of working fluid for an organic Rankine cycle in relation to waste heat recovery. Energy, 96, 592-602. https://doi.org/10.1016/j.energy.2015.12.098
Hærvig, J., Sørensen, K., & Condra, T. J. (2017). On the Fully-Developed Heat Transfer Enhancing Flow Field in Sinusoidally, Spirally Corrugated Tubes Using Computational Fluid Dynamics. International Journal of Heat and Mass Transfer, 106, 1051–1062. https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.080
Hærvig, J., Sørensen, K., & Condra, T. J. (2018). Early stages of agglomeration of adhesive particles in fully-developed turbulent pipe flows. International Journal of Multiphase Flow, 106, 254-267. https://doi.org/10.1016/j.ijmultiphaseflow.2018.04.017
Jesper Graa Andreasen,Martin Ryhl Kærn, and Fredrik Haglind. Assessment of methods for performance comparison of pure and zeotropic working fluids for organic Rankine cycle power systems. Energies, Vol. 12(9), 1783, 2019.
Ji Zhang, Adriano Desideri, Martin Ryhl Kærn, Torben Schmidt Ommena, Jorrit Wronski, and Fredrik Haglind. Flow boiling heat transfer and pressure drop characteristics of R134a, R1234yf and R1234ze in a plate heat exchanger for organic Rankine cycle units. International Journal of Heat and Mass Transfer, Vol, 108, 1787–1801, 2017.
Ji Zhang, Maria E. Mondejar and Fredrik Haglind. General heat transfer correlations for flow boiling of zeotropic mixtures in horizontal plain tubes. Applied Thermal Engineering, Vol, 150, 824–839, 2019.
Ji Zhang, Martin Ryhl Kærn, Torben Schmidt Ommena, Brian Elmegaard, and Fredrik Haglind. Condensation heat transfer and pressure drop characteristics of R134a, R1234ze(E), R245fa and R1233zd(E) in a plate heat exchanger. International Journal of Heat and Mass Transfer, Vol, 128, 136–149, 2019.
Ji Zhang, Xiaowei Zhu, Maria E. Mondejar and Fredrik Haglind. A review of heat transfer enhancement techniques in plate heat exchangers. Renewable and Sustainable Energy Reviews, Vol, 101, 305–328, 2019.
Mancini, R., Zühlsdorf, B., Aute, V., Markussen, W. B. & Elmegaard, B., 2019, 'Performance of heat pumps using pure and mixed refrigerants with maldistribution effects in plate heat exchanger evaporators‘, International Journal of Refrigeration, vol 104, pp. 390-403. DOI: 10.1016/j.ijrefrig.2019.05.023
Mancini, R., Zühlsdorf, B., Jensen, J. K., Markussen, W. B. & Elmegaard, B., 2018, 'Deriving guidelines for the design of plate evaporators in heat pumps using zeotropic mixtures', Energy, vol 156, pp. 492-508. DOI: 10.1016/j.energy.2018.05.026, Note: Content based on [CP03]
ME Mondejar, J Frutiger, S Cignitti, J Abildskov, G Sin, JM Woodley, F Haglind, Uncertainty in the prediction of the thermophysical behavior of new halogenated working fluids, Fluid Phase Equilibria 485, 220-233
ME Mondejar, JG Andreasen, L Pierobon, U Larsen, M Thern, F Haglind, A review of the use of organic Rankine cycle power systems for maritime applications, Renewable and Sustainable Energy Reviews 91, 126-151
Meroni, A., La Seta, A., Andreasen, J.G., Pierobon, L., Persico, G., Haglind, F.: Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems – PART A, Journal: Energies /ISSN:1996-1073, vol. 9, issue:5, 2016
Meroni, A., La Seta, A., Andreasen, J.G., Pierobon, L., Persico, G., Haglind, F.: Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems – PART B, Journal: Energies /ISSN:1996-1073, vol. 9, issue:6, 2016
Meroni, A., Zühlsdorf, B., Elmegaard, B., Haglind, F., 2018, ‘Design of centrifugal compressors for heat pump systems’, Applied Energy, vol 132, pp. 139-156. DOI: 10.1016/j.apenergy.2018.09.210
Mondejar, M., Frutiger, J., Cignitti, S., Abildskov, J., Sin, G., Woodley, J.M. and Haglind, F. (2019). Uncertainty in the prediction of the thermophysical behavior of new halogenated working fluids. Fluid Phase Equil., 485, 220-233.
Mondejar, M.E., Cignitti, S., Abildskov, J., Woodley, J.M. and Haglind, F. (2017). Prediction of properties of new halogenated olefins using two group contribution approaches. Fluid Phase Equil., 433, 79-96.
Singh, S., Sørensen, K., Condra, T.: Implications of fin profiles on overall performance and weight reduction of a fin and tube heat exchanger, Journal: Applied Thermal Engineering, 2017
Singh, S., Sørensen, K., Condra, T.: Influence of the degree of thermal contact in fin and tube heat exchanger: A numerical analysis, Applied Thermal Engineering, 2015
Zühlsdorf, B., Bühler, F., Bantle, M., Elmegaard, B., 2019, ‘Analysis of technologies and potentials for heat pump based process heat supply above 150 °C‘, Energy Conversion and Management: X, vol 2. DOI: 10.1016/j.ecmx.2019.100011
Zühlsdorf, B., Jensen, J. K., & Elmegaard, B., 2020. Exergy-based analysis of irreversibilities for heat pump working fluids and cycle layouts. [submitted]
Zühlsdorf, B., Jensen, J. K., Cignitti, S., Madsen, C. & Elmegaard, B., 2018, 'Analysis of temperature glide matching of heat pumps with zeotropic working fluid mixtures for different temperature glides', Energy, vol 153, pp. 650-660. DOI: 10.1016/j.energy.2018.04.048, Note: Content based on [CP02]
Zühlsdorf, B., Jensen, J. K., Elmegaard, B., 2019, ‘Heat pump working fluid selection – Economic and thermodynamic comparison of criteria and boundary conditions‘, International Journal of Refrigeration, vol 98, pp. 500-513. DOI: 10.1016/j.ijrefrig.2018.11.034
Zühlsdorf, B., Meesenburg, W., Ommen, T. S., Thorsen, J. E., Markussen, W. B. & Elmegaard, B., 2018, 'Improving the performance of booster heat pumps using zeotropic mixtures', Energy, vol 154, pp. 390-402. DOI: 10.1016/j.energy.2018.04.137

Articles, not peer reviewed

Cignitti, S., Zühlsdorf, B., Elmegaard, B., Woodley, J. M., Abildskov, J.: Simultaneous Design of Mixed Working Fluid and Heat Pump Process for Low-Grade Waste Heat Recovery. Energy 2018, (Submitted).

PhD-thesis

Andrea Meroni, Design and Optimization of Turbomachinery for Thermodynamic Cycles Utilizing Low-Temperature Heat Sources, 2018
Cignitti, S.: Optimization-based design of waste heat recovery systems, 2017
Hærvig, J., 2017, On the Adhesive Behaviour of Micron-sized Particles in Turbulent Flow: A Numerical Study Coupling the Discrete Element Method and Large Eddy Simulations. Aalborg Universitetsforlag. Ph.d.-serien for Det Ingeniør- og Naturvidenskabelige Fakultet, Aalborg Universitet https://doi.org/10.5278/vbn.phd.eng.00022
Jesper Graa Andreasen, Numerical evaluation of advanced working fluids for organic Rankine cycle systems, 2019
Zühlsdorf, B., 2019, High-performance heat pump systems: Enhancing performance and range of heat pump systems for industry and district heating. Kgs. Lyngby: Technical University of Denmark. DCAMM Special Report, No. S261

Scientific reports

Huan, B., Bühler, F., Holm, F.: Industrial Energy Mapping Thermcyc, Version 2, BHU, FBU Issue: 11, 2015.

Working papers/preprints

Zühlsdorf, B., Jensen, J. K., Elmegaard, B., 2018, ‘Numerical models for design and analysis of heat pumps with zeotropic mixtures’, figshare, DOI: 10.11583/DTU.6825443

Conference articles (peer reviewed)

Andrea Meroni, Matthias Geiselhart, Wei Ba, and Fredrik Haglind. Preliminary Design of Radial-Inflow Turbines for Organic Rankine Cycle Power Systems Considering Performance and Manufacturability Aspects. Proceeedings of the 5th International Seminar on ORC Power Systems – Athens, Greece – 09-11 Sep, 2019.
Andreasen, J.G., Larsen, U., Knudsen, T., Haglind, F.: Design of organic Rankine cycles using a non-conventional optimization approach, ECOS 2015
Andreasen, J.G., Pierobon, L., Larsen, U., Haglind, F.: Multi-objective optimization of pure and mixed working fluids for organic Rankine cycles, ASME ORC 2015
Bühler, F., Holm, F. M., Huang, B., Andreasen, J. G., Elmegaard, B.: Mapping of low temperature heat sources in Denmark. In Proceedings of ECOS 2015: 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2015
Cignitti, S., Woodley, J.M., Abilskov, J.: Integrated computer-aided framework for chemical product and process application design and optimization for waste heat recovery, Proceedings of the 27th European Symposium on Computer Aided Process Engineering ESCAPE 27, Spain 2017
Cignitti, S., Zhang, L., Gani, R.: Computer-aided framework for design of pure, mixed and blended products, Computer Aided, Chemical Engineering. Vol. 37 (in press), 2015
Frutiger, J., Abildskov, J, Sin, G.: A rigorous methodology for development and uncertainty analysis of group ontribution based property models, Nineteenth Symposium on Thermophysical Properties, 2015, Boulder
Frutiger, J., Abildskov, J, Sin, G.: Global sensitivity analysis of computer-aided molecular design problem for the development of novel working fluids for power cycles, Proceedings of the 26 European Symposium on Computer Aided Process Engineering - ESCAPE 26, Portorož, 2016
Frutiger, J., Abildskov, J, Sin, G.: Group contribution modelling for the prediction of safety-related and environmental properties, AIChE 2016 Spring Meeting and 12th Global Congress on Process Safety, Houston, 2016
Frutiger, J., Abildskov, J, Sin, G.: Outlier treatment for improving parameter estimation of group contribution based models for upper flammability limit, Proceedings of the 25th European Symposium on Computer Aided Process Engineering, Copenhagen, 2015
Frutiger, J., Abildskov, J, Sin, G.: Sensitivity analysis of Computer-aided molecular design problem for the development of novel working fluids for power cycles, 10th European Congress of Chemical Engineering, Nice, 2015
Frutiger, J., Abildskov, J, Sin, G.: Sensitivity analysis of molecular design problem for the development of novel working fluids for power cycles 2015 AIChE Annual Meeting, 2015, Salt Lake City
Frutiger, J., Cignitti, S., Abildskov, J., Woodley, J.M., Sin, G.: Computational chemical product design problems under property uncertainties
Frutiger, J.; Abildskov, J.; Sin, G.: Group contribution modelling for the prediction of safety-related and environmental properties, AIChE 2016 Spring Meeting and 12th Global Congress on Process Safety, 2016, Houston
Frutiger, J.; Bell, I.; Connell J. P. ; Kroenlein, K.; Abildskov, J.; Sin, G.: Uncertainty Assessment of Equations of State with Application to an Organic Rankine Cycle 2016 AIChE Annual Meeting, 2016, San Francisco
Frutiger, J.; Bell, I.; Connell J. P. ; Kroenlein, K.; Abildskov, J.; Sin, G.: Uncertainty Assessment of Equations of State with Application to an Organic Rankine Cycle, Proceedings of ECOS 2017
Hærvig, J., K. Sørensen, T. Condra.: Numerical Investigation of Simultaneously Deposition and Re-entrainment Fouling Processes in Corrugated Tubes by Coupling CFD and DEM, Conference: The First Pacific Rim Thermal Engineering Conference, Hawaii, 2016
Hærvig, J., K. Sørensen, T. Condra.: Numerical Investigation of Single-Phase Fully Developed Heat Transfer and Pressure Loss in Spirally Corrugated Tubes, Conference: The 56th Conference on Simulation and Modelling (SIMS56), Linköping, Sweden, 2015
Hærvig, J., K. Sørensen, T. Condra.: Numerical Investigation of the Fully-Developed Periodic Flow Field for Optimal Heat Transfer in Spirally Corrugated Tubes, Conference: The first Pacific Rim Thermal Engineering Conference, Hawaii, 2016
Hærvig, J., Sørensen, K., & Condra, T. J. (2017). Prediction of Particle Agglomeration and Deposition by Reduced Particle Stiffness Discrete Element Simulations. PhD Research Day 2017 - Department of Energy Technology, Aalborg, Danmark.
Ji Zhang, Brian Elmegaard and Fredrik Haglind. Heat transfer and pressure drop characteristics of high temperature condensation of R245fa and R1233zd in a plate heat exchanger. Proceedings of the 16th International Heat Transfer Conference, IHTC-16, August 10-15, 2018, Beijing, China.
Ji Zhang, Enrico Baldasso, Roberta Mancini, Brian Elmegaard and Fredrik Haglind. Evaluation of heat transfer correlations for flow condensation in plate heat exchangers and their impact on the design of organic Rankine cycle systems. Proceeedings of the 5th International Seminar on ORC Power Systems – Athens, Greece – 09-11 Sep, 2019.
Liu, W., Wieland, C., Meined, D., Spliethoff, H.: Optimal Heat Source Temperature for supercritical Organic Rankine Cycle, Conference: 16th International Refrigeration and Air Conditioning Conference at Purdue, July 11-14, 2016
Mancini, R., Zühlsdorf, B., & Elmegaard, B. 2017 ‘Derivation of guidelines for the design of plate evaporators in heat pumps using zeotropic mixtures’ in Proceedings of ECOS 2017: 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Note: The paper was extended and published as [JP03]
Mancini, R., Zühlsdorf, B., Markussen, W. B., & Elmegaard, B., 2019. ´Design recommendations for plate heat exchangers in heat pumps using pure and mixed refrigerants’. In Proceedings of the 25th IIR International Congress of Refrigeration, International Institute of Refrigeration. https://doi.org/10.18462/iir.icr.2019.853
Meroni, A. Andreasen, J.G., Pierobon, L., Haglind, F.: Optimization of cycle and expander design of an organic Rankine cycle unit using multi-component working fluids, Proceedings of ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, June 13-17, 2016, Soul, South Korea
Reinholdt, L., Kristofferson, J., Zühlsdorf, B., Elmegaard, B., Jensen, J. K., Ommen, T. S., Jørgensen, P. H., 2018, ‘Heat pump COP, part 1: Generalized method for screening of system integration potentials’ in Proceedings of the 13th IIR Gustav Lorentzen Conference on Natural Refrigerants, DOI: 10.18462/iir.gl.2018.1380
Singh, S., Sørensen, K., Condra, T.: Multiphysics Numerical Modeling of a Fin and Tube Heat Exchanger (Presented), Conference, SIMS 56, Linköping, 2015
Singh, S., Sørensen, K., Condra, T.: Numerical modeling of fin and tube heat exchanger for waste heat recovery, Conference: Proceedings of the First Pacific Rim Thermal Engineering Conference (PRTEC-2016), Hawaii's Big Island, USA, 13-17 March, 2016
Singh, S., Sørensen, K., Condra, T.: Performance study of a fin and tube heat exchanger with different fin geometry Conference: 29th INTERNATIONAL CONFERENCE on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems (ECOS 2016), 2016, Portorož, Slovenia
Singh, S., Sørensen, K., Condra, T.: Parametric CFD Analysis to Study the Influence of Fin Geometry on the Performance of a Fin and Tube Heat Exchanger, Conference: EUROSIM-2016, The 9th EUROSIM Congress on Modelling and Simulation. September 12-16, 2016, Oulu, Finland
Zühlsdorf, B., Bühler, F., Mancini, R., Cignitti, S. & Elmegaard, B., 2017, ‘High Temperature Heat Pump Integration using Zeotropic Working Fluids for Spray Drying Facilities’ in Proceedings of the 12th IEA Heat Pump Conference 2017.
Zühlsdorf, B., Christiansen, A. R., Müller Holm, F., Funder-Kristensen, T., Elmegaard, B., 2018, ‘Analysis of possibilities to utilize excess heat of supermarkets as heat source for district heating’ in Proceedings pf 16th International Symposium on District Heating and Cooling DHC2018, Energy Procedia, vol 149, pp. 276-285. DOI: 10.1016/J.EGYPRO.2018.08.192
Zühlsdorf, B., Jensen, J. K., & Elmegaard, B., 2019. Comparison of zeotropic working fluid mixtures in different heat pump cycles. In Proceedings of the 25th IIR International Congress of Refrigeration, International Institute of Refrigeration. https://doi.org/10.18462/iir.icr.2019.1166
Zühlsdorf, B., Jensen, J. K., & Elmegaard, B., 2019. Exergy-based analysis of irreversibilities for heat pump working fluids and cycle layouts. In Proceedings of ECOS 2019: 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Wroclaw, Poland.
Zühlsdorf, B., Jensen, J. K., Cignitti, S., Madsen, C. & Elmegaard, B., 2017, ‘Improving efficiency of heat pumps by use of zeotropic mixtures for different temperature glides’ in Proceedings of ECOS 2017: 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Note: The paper was extended and published as [JP01]
Zühlsdorf, B., Schlemminger, C., Bantle, M., Evenmo, K., Elmegaard, B., 2018, ‘Design recommendations for R-718 heat pumps in high temperature applications’ in Proceedings of the 13th IIR Gustav Lorentzen Conference on Natural Refrigerants, DOI: 10.18462/iir.gl.2018.1367

Conference articles, not peer reviewed

Cignitti, S., Zhang, L., Gani, R.: Computer-Aided Chemical Product Design Framework: Design of High Performance and Environmentally Friendly Refrigerants, ECCE, Abstract, online, 2015
Cignitti, S., Zhang, L., Kalakul, S., Gani, R.: Systematic Computer-Aided Framework for Sustainable Chemical Product Design, AIChE, Abstract, online, 2015
Frutiger, J., Abildskov, J, Sin, G.: Estimation and Uncertainty Analysis of Flammability Properties for Computer-aided molecular design of working fluids for thermodynamic cycles, CAPE Forum 2015, 2015, Paderborn
Zhang, L., Cignitti, S., Gani, R.: A New Optimization Model for Computer-Aided Molecular Design Problems, AIChE, Abstract, online, 2015

Planned publications

Andreasen, J. G., Frutiger, J., …: Uncertainties in economic analyses
Andreasen, J.G., Kærn, M.R., Pierobon, L., Wronski, J., Haglind, F.: Methods for comparing the performance of pure and mixed working fluids for organic Rankine cycles, Journal publication, 2017
Atlason, G.: Waste heat recovery potential for Danish marine industry
Bühler, F., Petrovic, S., Omen, T., Holm, F., Elmegaard, B.: Identification of Excess Heat Utilisation using GIS: Analysis of Case Studies for Denmark. Conference: 30th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems 2017, San Diego.
Cignitti, S., Zhang, L., Fang, Z., Gani, R.: Computer-aided Framework for Chemical Product Design, Journal: Computers & Chemical Engineering, 2016
Frutiger, J. Bell, I., O’Connell, J. P., Kroenlein, K., Abildskov, J.,, Sin, G.: Uncertainty Assessment of Equations of State Applied to Organic Rankine Cycles Journal: Molecular Physics, SUBMITTED
Frutiger, J., Cignitti, S.: Integrate uncertainty and CAMD optimization, PLANNED
Hærvig, J., Singh, S., Condra, T., Sørensen, K.: Particle Aggregation and Deposition in Turbulent Pipe Flow by Coupling Large Eddy Simulations and the Discrete Element Method, Journal: International Journal of Multiphase Flows?, 2017
Liu, W., Wieland, C., Cignitti, S., Spliethoff, H.: Optimal-Heat-Source-Temperature Integrated Molecular Design for Optimization of Organic Rankine Cycle.Journal: Energy, PLANNED
Liu, W., Wieland, C., Spliethoff, H.: Optimal-Heat-Source-Temperature Intergrated Molecular Design for Optimization of Organic Rankine Cycle, Journal: Energy, TO BE SUBEMITTED
Meroni, A.: Uncertainty analysis of turbine loss correlations, PLANNED
Meroni, A.: Working fluid effects on ORC process and turbine, PLANNED
Zhang, L., Cignitti, S., Gani, R.: Generic Mathematical Programming Formulation and Solution for Computer-Aided Molecular Design, Journal: Computers & Chemical Engineering, 2015

Other dissemination (books/anthologier, feature articles , television)

Andreasen, J.G., Elmegaard, B., Haglind, F.: Utilization of low temperature heat for environmentally friendly electricity production, Poster presented at Conference on Energy and Environment for the Future (Innovationsfonden), Copenhagen, Denmark, 2014

Updated on 18 May 2020